Protective Clothing (Type 5-B/6-B)

Single Use Protective Clothing

Single Use protective clothing is designed to provide protection to the full body against airborne solid particulates and offering limited protective performance against liquid chemicals. It is manufactured in compliance with EN 14126:2003 standards.

KEY FEATURES

• These protective clothings are for single-use
• Elasticated cuff, ankle, hood and back
• Zipper with front closure flap

APPROVALS

• EN 14126 Protective Clothing - PerformanceRequirement And Test Methods For ProtectiveClothing Against Infective Agents
• EN ISO 13688 Protective Clothing – General Requirements
• EN 13034+A1 Protective Clothing Against Liquid chemical (Type 6-B)
• EN ISO 13982-1 Protective Clothing For Use Against Solid Particulates (Type 5-B)
• EN 1149-5 Protective Clothing-Electrostatic properties

INTENDED USE

• For use in clinical and laboratory settings
• Intended to protect from the transfer of microorganisms and bodily fluids in low or minimal risk patient isolation situations
• Not intended for high-risk surgical procedures or where the risk of contamination is high

SIZING

Appropriate size garment should be selected to allow sufficient movement for the task whilst maintaining a secure fit.

 

PACKAGING

Each product is individually folded and packaged.

Each box containes required amount of packaged products

75 pieces in 1 Box.

600 pieces in 1 Pallet.

 

STORAGE AND DISPOSAL

• Store in dry, clean conditions in original packaging, away from direct sunlight, sources of high temperature, and solvent vapours
• Expected shelf life is three years from the date of manufacture when stored as stated
• Replace garment if damaged, heavily contaminated or in accordance with local work practice or regulations
• Handle and dispose of contaminated garments with care in accordance with applicable local regulations

WARNING AND LIMITATIONS

Make sure that the product is suitable for the application and fitted correctly. Product must never be altered or modified. Final determination as to the suitability of these products for a particular situation is the employer’s responsibility. This information is subject to revision at any time. If you have questions, you may contact Biotex technical experts.